x
zotyaba/iStock/GettyImages

How to Find Wattage With Voltage & Frequency

Growth Trends for Related Jobs

The relationship between wattage, voltage and frequency is governed by circuit impedance. The impedance is a complex form of resistance. It's a combination of regular resistance and the reactive components. Reactive components frequency are dependent components such as inductors and capacitors. Together the resistance and reactive components form the impedance. Once you know the impedance, you can calculate watts.

Determine the voltage, V, and the frequency, f. Refer to electrical schematics and operational requirements of the circuits. As an example, assume V is 120 volts and f is 8 megahertz or 8 x 10^6 hertz.

Calculate the total resistance of the circuit, or Rt. Rt depends on the number of resistors and how they are connected. If one resistor exist, Rt is the value of that resistor. If several resistors exist, determine if they are connected in series or parallel and use the following formula:

Resistors in Series: Rt = R1 + R2 + R3 ... Rn

Resistors in Parallel: Rt =1/(1/R1 + 1/R2 + 1/R3 ...1/Rn)

As an example, assume Rt is 300 ohms.

Calculate the total inductance of the circuit, or Lt. Lt depends on the number of inductors and how they are connected. If only one inductor exist, Lt is the value of that inductor. If several inductors exist, determine if they are connected in series or parallel and use the following formula:

Inductors in series: Lt = L1 + L2 + L3 ... Ln

Inductors parallel: Lt =1/(1/L1 + 1/L2 + 1/L3 ....1/Ln)

As an example, assume Lt is 5 microhenries.

Calculate the total capacitance of the circuit, or Ct. Ct depends on the number of capacitors and how they are connected. If only one capacitor exist, Ct is the value of that capacitor. If several capacitor exist, determine if they are connected in series or parallel and use the following formula:

Capacitors in series: Ct =1/(1/C1 + 1/C2 + 1/C3 ...1/Cn)

Capacitors parallel: Ct = C1 + C2 + C3 ... Cn

As an example, assume Ct is 3 microfarads

Calculate the reactance from the inductor, or XL, using the formula XL = 2 * pi * f * Lt where pi is 3.1415. Using the example numbers:

XL = 2 * 3.1415 * 8 x 10^6 * 5 x 10^-6 = 251.32 ohms

Calculate the reactance associated with the capacitor, or XC, using the formula XC = 1/[2 * pi * f * Ct]. Using the example numbers:

XC = 1/(2 * 3.1415 * 8 x 10^6 * 3 x 10^-6) = 1/150.79 = 0.0066 ohms

Calculate total reactance, or XT, using the formula XT = XL - XC. Continuing with the example:

XT = 251.32 - 0.0066 = 251.31

Calculate impedance, Z, using the formula Z = sqrt [Rt^2 + XT^2]. Continuing with the example:

Z = sqrt [300^2 + 251.31^2] = sqrt [90,000 + 63,156.7] = sqrt[153,156] = 391.35 ohms.

Calculate the circuit current flow, or "I," using the formula I = V/Z. Continuing with the example:

I = 120/391.35 = 0.3 amps

Finally, calculate the power, in watts, using the formula P (watts) = V x I. Continuing: P (watts) = 120 x 0.30 = 36 watts.

About the Author

Dwight Chestnut has been a freelance business researcher and article writer for over 18 years. He has published several business articles online and written several business ebooks. Chestnut holds a bachelor's degree in electrical engineering from the University of Mississippi (1980) and a Master of Business Administration from University of Phoenix (2004).

Cite this Article